Inspection of explosion-proof electrical equipment for compliance with requirements of the hazardous area in which this equipment is installed. Inspection of explosion-proof equipment installation correctness. Verification of cable termination in explosion-proof distribution boxes, on terminal rows. Registration for installation defects (inconsistencies). Analysis of inspections performed and decision-making on certificates, inspection protocol issue for explosion-proof equipment. Consultation of Company clients on explosion-proof equipment inspection. Preparation of documentation work packages to be handed over to customers. Consultation of Company clients on explosion-proof equipment inspection. Interaction with the company management and representatives of the customer on all matters including planning, monitoring of works, ordering of material etc. Preparation docs for PTW. Inspection of explosion-proof electrical equipment for compliance with requirements of the hazardous area in which this equipment is installed. Inspection of explosion-proof equipment installation correctness. Verification of cable termination in explosion-proof distribution boxes, on terminal rows. Registration of installation defects (inconsistencies). . Analysis of inspections performed and decision-making on certificates, inspection protocol issue for explosion proof equipment. Consultation of Company clients on explosion proof equipment inspection Preparation of documentation work packages to be handed over to customers Interaction with the company management and representatives of the customer on all matters including planning, monitoring of works, ordering of material etc. Preparation required material and tools for working. Reading and interpreting blueprints, schematics and electrical documents. Arranging the spares, tools, drawings and safety equipment for execution of the jobs.Obtain the inspection, verification reports of the job completed.

Tracing, diagnosing, and rectifying electrical faults. Using test equipment and hand tools to diagnose locate and fix electrical problems. Checking and testing electrical equipment and replacing them where required. Carrying out electrical installation and maintenance work Connection of wiring of electrical equipment. Working on different areas including in hazardous area (red zone) Working with different cable SWA cables. Interpreting work instruction, drawings, schematic diagrams. Investigation and troubleshooting, testing of electrical equipment, see below: Lighting system (normal, emergency and escape system) LV/HV motor system. UPS system. Earthing system. Circuit breaker and other components. Parts of ruck in/ruck out. Inspecting electrical components to ensure that high-quality work, see below: Inspection of the lighting system (6Month,1Year) as per RoK and local standards Inspection of LV/HV motor (6M,1Y,4Y) Inspection of Earthing system (6Y,1Y) Inspection of HT/EL distribution board (6M,1Y) Inspection of the UPS system, electrical batteries. Administrative work like preparation of PTW for all type of electrical activities( Permit to Work, risk assessment, method statement), Audit. SAP (checking weekly activities, notification where required (Work Order), confirmation when work is done, (Fully, partially). Daily report for Line Manager. Preparation required material and tools for working. Took the highest level of care for keeping the workplace area safe, organizing by RoK and Company rules.

Inspecting Electrical/instrumentation equipment for its compliance with the area classification (hazardous area drawing). As per ice-EX –Standards. Verifying-layout drawings, single line drawing, termination drawing for its correctness. Conducting- derailed, close& visual-grade of inspections as per requirement. Recording-all-faults and rectification details in the checklist as per Lec-EX-Standard. Preparation of Ex-register & collecting necessary details for it from field equipment. Rectification of faults food during an inspection, according to Lec-EX-Standards. UP dating, the faults found during an inspection according to its cause & effect. Categorizing the faults found during an inspection according to its cause & effect. De-certifying of instruments found with UN-Authorized modification/non-compliance-with-hazardous area classification as per Lec-EX-Standards. Inspecting Electrical/instrumentation equipment for its compliance with the area classification (hazardous area drawing). As per ice-EX –Standards. Installing and maintaining electrical systems and equipment; Operating and maintaining electric motors, transformers, generators, controls, and other electrical equipment; Reading and interpreting blueprints, schematics, and electrical documents; Examining and diagnosing electrical systems and equipment; Using computers and related software applications; Overhauling, troubleshooting, calibration, maintenance, repair, installation & commissioning of various field instruments such as CCEP smart and conventional transmitters, fisher, CCEP controller, Pressure & Level switches. Planning, distributing and supervision of team in the execution of shutdown and revamping projects, maintenance jobs with the teamwork. Applying for the work permits, obtaining the permits and distributing the same among the team of technicians. Obtain the inspection, verification reports of the job completed. Reporting the daily progress to the FPS and the company. Arranging the spares, tools, drawings and safety equipment for execution of the jobs. Observe the team and guideline them for following the safety rules and regulation as per the offshore platform standards. Commissioning of the equipment and plants. Carried out repairing, servicing work during shut-down, which includes checking, stripping, cleaning, replacing, testing & calibration of various instruments, analyzers, and fire & gas systems.

Handled the various advanced testing equipment for the calibration, testing, and troubleshooting of various instruments. Ensured the equipment & instruments are functioning as per prescribed industry standards. Assigning and monitoring work; Troubleshooting electrical problems; Communication, interpersonal skills as applied to interaction with coworkers, supervisor, the general public, etc. sufficient to exchange or convey information and to receive work direction Installation of Power Cables & Cable Trace Termination Cables as per termination drawing Installation of Electrical EX equipment Installation & Termination Trace Heating’s, Junction Boxes, Thermostat Work with drawings Preparation of PTW documents Filling the ECL 031A (Electrical Construction Checklist), ICL 004B (Instrument pre-commissioning checklist), Maintenance Inspection Result Checklist. Perform remedial work, Corrective maintenance, Punch List Verification(PLV) for all Electrical and Instrument Equipment: BARTEC, ABTECH Exe, Exd Junction Boxes; CORTEN Exi, Exd Junction Boxes and Marshalling panels; MEDC Exd beacons and speakers; COEX Limited CCTV cameras; DRAGER and SIEMENS Exia Fire & Gas system, CHALMIT Lighting Exde Luminaries; ROSEMOUNT and ABB Exia, Exib Instrumentation(PT, LT, TT, PDT, LT); ABB Exde [na] electrical motors; FORDISONZO hydraulic and air control valves includes Exe, Exia, Exd associated equipment, BIFOLD Exd solenoid valves etc. Installation different types of stuffing glands, braided armoire cable glands, steel wire armoire cable glands: HAWKE, KAPRI, CMP, PEPPERL & FUCHS; Performs Electrical equipment Earthling continuity test Intrinsically safe equipment loop test; Verifying all checks by relevant IEC 60079/ATEX standards Before the execution of job identification of the materials required a done and ordered in advance coordinated with the seniors for the timely arrival of spares in the site. Have a dedication to achieving the target as per the priority of the job. Involve with the EX. inspectors for completing the quality documents for the inspected items. Day to day reporting of the job progress is done by sending reports to the supervisor. Also handling the job with confidence on-site in absence of supervisor by assigning the jobs area wise to all the technicians. Checking of all the tools conditions available done regularly. Additional tools requirements as per job requested from the material department. List of tools for every technician’s toolbox maintained. Perform toolbox meeting before starting the site activity to let all the technicians well aware of work hazards. Fully aware of client safety rules and implementation is done correctly at the site.

Communication, interpersonal skills as applied to interaction with coworkers, supervisor, the general public, etc. sufficient to exchange or convey information and to receive work direction Installation of Power Cables & Cable Trace Termination Cables as per termination drawing Installation of Electrical EX equipment Installation & Termination Trace Heating’s, Junction Boxes, Thermostat Work with drawings Preparation of PTW documents Installation of trays, Pulling and dressing, Terminate all kinds of cables, Installation and terminate instrument of the equipment, instrumentations, systems. Installation and terminate systems of fire and gas, Loud-speaking communication, Work with the documentation. Installation of Bales and the equipment of transmitters: temperatures, pressure; manometers. Work with devices of Bales and A. Megger test, Recall of cables. Installation of electric hardened type of Ex of the equipment. Installation of infrared gages of a flame, pulse tubes. Test of pulse tubes for tightness. Trailer seal of cables (Gland) marks СМР Work with standards typical designs an electric equipment

Techniques and technology, Electroenergetics

Electrical and instrumentation installation and inspection in hazardous area., Inspection/instalation/repairing of the electrical and instrument equipments.

KPO, H2S Certificate

TCO, H2S Respiratory Protective Equipment

TCO, SI-118 "Safe Excavation Practices"

TCO, Permit To Work & Hazard identification

NCOC, H2S Certificate

NCOC, Permit To Work, TRIC( level 2) course certificate

NCOC, ESR, First Aid

NCOC, Confined Space Entry Master level

NCOC, Safety Work at Heights

NCOC, H2S Level 2 for working in Red Zone

NCOC, Authority Expert for Gas Test included plant area, red zone ,confined spac

NCOC, Competent Electrical Person

TCO, Confined Space Entry

TCO, Working at Heights